Oxidized bitumen 150/5

Oxidized bitumen 150/5 is based on petroleum bitumen which is made by blowing bitumen 60/70 by very hot air.This types of bitumen is very hard and breakable.

Uses bitumen 150/5

Oxidised bitumen 150/5 is using as raw material for bitumen coat, roofing, insulation and isolation bitumen membrane sheet.Oxidised bitumen 150/5 is mainly using in paint manufacturing and coating in very hot area.

Surface preparation to use oxidised asphalt 150/5

Before using oxidised asphalt 150/5 surfaces must be dry, clean and free of loose particles, formwork, curing products, irregularities, slurry.If you use this types of bitumen without cleaning the area the bitumen 150/5 will easily remove and break.

Application of blown bitumen 150/5

The blown bitumen 150/5 should be heated double temperature against the softening point to be able to have flow and viscosity.Normally heating of such hard oxidized bitumen should be arranged via hot oil by circulation inside of isolated jacket.

Storage/handling of oxiasfalto block 150/5

Oxiasfalto 150/5 has 10 years validity with multi time heating and colding, please refer to MSDS.It is better to keep the bitumen 150/5 under shelter and out of rain,sun and wind.

Packing of bitume oxyde 150/5 in meltable polyamide bag , keg and craft bag , carton box and drum

Bitume oxyde 150/5 is available in 25kg meltable and craft bag, drum and bulk.Normally oxidized bitumen 150/5 packing on pallet and 40 bags can stack on wooden pallet.20 pallet we can load to 20ft container.If you choose carton box for packing of oxidised bitumen 150/5 then 880 carton box we can load to 20ft.In case of ordering the bitumen 150/5 in drum it would be too difficult to take out the bitumen from the drum but able to load 110 drum per container and in case of palletize we can load 80 pallets.We do recommend you to take the bitumen in meltable bag to be able to use directly and prevent to create chemical trash.

Specification of oxidized bitumen 150/5

TEST SPECIFICATION

STANDARD RANGE

TEST METHOD

Specific gravity @25/25 C

1.05 approx.

D-70

Penetration @25C

4/6

D-5

Softening point C

145/155

D-36

Ductility@25C

1.5min

D-113

Loss on heating (wt)%

0.2max

D-6

Flash point C

260min

D-92

Solubility in CS2 (wt)%

99min

D-4

Specific gravity @25/25 C

1.05 approx.

D-70

Oxidized Bitumen 150/5

Oxidized Bitumen 150/5Specification of Oxidized Bitumen Grade 115/15